Cobra Electronics 29 LX LE - Manual (Page 24)

24
Operation
. .When.switched.to.ANL.the.Automatic.Noise.
Limiter.is.activated..This.helps.reduce.noise.
created.by.the.vehicle’s.electronics.
. .When.switched.to.NB/ANL.mode.the.RF.Noise.
Blanker.is.also.activated,.providing.increased.
noise.filtration.
. .When.switched.to.OFF.mode.all.noise.
filtration.will.be.turned.off.
NB-ANL/OFF
(Noise Blanker /
Automatic Noise
Limiter) Button
RF Gain Control
RF Gain Control
The.RF.Gain.is.used.to.optimize.reception.in.
strong.or.weak.signal.areas..
Note
The RF Gain is used to optimize
reception in weak signal areas.
Note
The RF noise blanker is very
effective in reducing repetitive
noises such as ignition interfer-
ence.
Rotate.the.RF.Gain.knob.counterclockwise.to.
reduce.gain.in.strong.signal.areas..In.weak..
signal.areas.turn.clockwise.to.increase.gain.
1
NB-ANL/OFF (Noise Blanker/Automatic
Noise Limiter) Button
1
SWR/CAL
NB/ANL
VOL SQ DYNAMIKE RF GAIN DELTA TUNE T BACK
SWR
CAL
OFF MIN MIN OFF MAX
ESC
MEM SCAN
S/RF
M
EN
U PU
SH ENT
E R
SIG
RF
+30dB
1
1.5 2 3
CAL
3 5 7 9
SWR TX
RX
NB/ANL
MEM WX !
ANL
S/RF
CH 9/
19
CB/WX/
DIM
SCAN
PA