ClearSounds CS-A55 - Manual (Page 8)

8 – ENGLISH 9 – ENGLISH
between pressing the CH button for each handset
Setting your Phone
in standby mode, press the SEL button once, then the lcD will show
prograM to indicate you have entered the setting mode.
LCd CONTRAST SETTING [SEL 2]
Press the SEL button, then the 2 key, the current level CONTRAST
ADJ X[X=1,2,3,4] will show on the LCD. Press the or button to
get the desired level and press the SEL button once more to confirm
and exit.
SETTING THE RINGER [SEL 3]
Press the SEL button, then the 3 key, the current mode RING ON/OFF
will show on the LCD. Press the or button to activate/deactivate
the ringer function. Press the SEL button once more to confirm and
exit. You should hear a confirmation beep.
SETTING THE dATE ANd TImE [SEL 4]
Press the SEL button, then the 4 key, the SET TIME will show on the
LCD and the month with flash. Press the or button to get the
desired month then press the SEL button to confirm and enter the next
item (the sequence is MONTH-DAY-HOUR-MINUTE). After the setting
the correct date and time, press SEL button to confirm. You should hear
a confirmation beep.
SETTING THE KEYPAd TONE ON OR Off [SEL 5]
Press the SEL button, then the 5 key. Press the or to select Beep
On or Beep Off then press the SEL button to confirm.
AUTO AmPLIfY SETTING
Auto Amplify ON
To set handset amplifier so that it will aUToMaTicallY return to your
previous volume setting every time you use the handset without
having to press the “AMPLIFY” button.
simply turn the “AUTO AMPLIFY” switch in the battery compartment
to the on (up) position using the tip of a pencil. When the “AUTO
AMPLIFY” switch is in the on position, you do not need to press the
“AMPLIFY” button on the side of the handset. on any call, you can
temporarily turn oFF and turn back on the AUTO AMPLIFY feature
by pressing the “AMPLIFY” button. When the lED indicator light is
on the aMpliFY feature is engaged.
cS-a55-TriLingual.indd 8 5/28/08 9:10:31 aM