Clarion DB455MC - Manual (Page 18)

280-8137-00
DB455MC
19
English
Erasing operation (ERASE function)
Erasing recordings made using MUSIC
CATCHER is performed in the MC mode and
the following 3 erasing modes are available.
“TRK ERASE” : erase only one file.
“FLD ERASE” : erase the whole folder.
“ALL ERASE” : erase all the contents of
the flash memory.
1. Press the [SRC] button to select the MC
mode.
2. Each time you press the [ER] button, the
display switches in the following order:
TRK ERASE ➜ FLD ERASE ➜ Normal
mode
Note:
• Do not turn off the power to the unit or switch the
operation mode during erasing recordings.
●TRK ERASE
1. Press the [SRC] button to select the MC
mode.
2. Play back a track to be erased, and press
the [ER] button to select “TRK ERASE”.
3. While “TRK ERASE” is showing on the
display, press and hold the [ ] button for 2
seconds or longer. The title display shows
“ERASING” as the track currently being
played back is erased.
●FLD ERASE
1. Press the [SRC] button to select the MC
mode.
2. Play back any track of the folder to be
erased, and press the [ER] button to select
“FLD ERASE”.
3. While “FLD ERASE” is showing on the
display, press and hold the [ ] button for 2
seconds or longer. The title display shows
“ERASING” as the folder currently being
played back is erased.
●ALL ERASE
1. Press the [SRC] button to select the MC
mode.
2. Press the [ER] button for 2 seconds or longer
to select “ALL ERASE”.
3. While “ALL ERASE” is showing on the
display, press and hold the [ ] button for 2
seconds or longer. The title display shows
“ERASING” as ALL ERASE is executed.
MUSIC CATCHER Operations
Remaining capacity of the memory
By pressing the [REC] button while in the MC
mode, the remaining capacity of the flash
memory can be displayed for 4 seconds as an
approximate recordable time in “MM (minute):
SS (second)”.
The title display shows “AVL 123:45”.
Note:
• The recordable time shown varies according to
the set recording mode