Clarion VMA7483 - Manual (Page 15)

VMA7483
15
English
Owner
’s Manual
* The operations on this page are performed with
the remote control unit.
Setting Automatic LCD Panel Startup
This function starts the LCD panel automatically
when the ignition key is moved to ACC.
* The default setting is “OFF”.
Note:
This function is not available while driving or when
an RGB screen is displayed.
1. Press the AUTO/TIME button to display the
AUTO selection screen.
2. Press the setup button (1) to select “ON”.
The Î mark is displayed to the left of “ON”.
WIDE
O N
OFF
R T N
AUTO SEL
Sets unit to “ON”
Sets unit to “OFF”
Noes:
• When the setup button is in the “ON” position,
the LCD panel is automatically started up when
the ignition key is moved to ACC .
• The LCD panel can be opened and retracted
using the LCD panel OPEN/CLOSE button
when the setup button is set to “ON”.
• Set the setup button to “OFF” when you wish
to cancel this function.
3. The previous screen is displayed by pressing
the set button (RTN).
Setting LCD Retraction Delay
To protect the LCD panel, it is automatically re-
tracted when the engine is turned off or the igni-
tion key is moved to the ACC OFF position.
It is possible to set a retraction delay between
engine turn off and start of LCD retraction.
• The default setting is 5 seconds.
• This setting is designed to prevent the LCD
panel opened as the ignition key is moved to
ACC ON from being automatically retracted
when power from a weak battery is temporarily
cut off and it takes longer to start the engine.
• The panel can be retracted in the normal way
by pressing the LCD panel OPEN/CLOSE but-
ton also during the retraction delay interval.
Note:
This function is not available while driving or when
an RGB screen is displayed.
1. Hold down the AUTO/TIME button for 2 sec-
onds to display the TIME selection screen.
WIDE
1sec
2sec
3sec
4sec
5sec
R T N
TIME SEL
2. Use the setup buttons (1 to 5) to set the re-
traction delay.
The
Î mark is displayed to the left of the se-
lected time.
Sets a delay of 1 second.
Sets a delay of 5 seconds.
Sets a delay of 4 seconds.
Sets a delay of 3 seconds.
Sets a delay of 2 seconds.
3. The previous screen is displayed by pressing
the set button (RTN).
Setup