Compaq A3000 EN - Manual (Page 32)

Getting Started Guide
30
The PC is not available
You have initiated a task that requires assistance from the PC, but the PC was not
available. Make sure:
> Your PC is on and is not in suspend mode. If you are unsure, move the
mouse. If you can see your mouse moving, your PC should be available.
> Check whether the USB cable is connected to both the A3000 and your PC.
Lastly, try your task again later if the A3000 is still processing a previous task,
such as a PC print job, scan job, or copy.
Scanning menu does not appear
The Scan To menu is created by your computer. If the A3000 has not been
attached to a PC with the settings utility installed, the Scan To menu will be
blank when you press the scan button. Otherwise,
> Make sure the USB cable is connected and the A3000 software has been
installed.
> Run the A3000 settings utility. If it is already running, right-click on the icon
in the system tray and shut it down before running it again.
For help in setting up your Scan To menu, see “Scanning” on page 21.
Contacting Compaq
Visit our Web site at www.compaq.com to:
> Access publications for your printer.
> Download software updates.
> Search for solutions to common problems.
> Learn new ways to use your printer.
> Look for special offers and purchase inkjet supplies and media.
To quickly navigate to the Compaq website, click:
Start Program Files Compaq A3000 Compaq Online.