Cannon 10455G - Manual (Page 14)

A non-stick griddle is supplied for use over the two burners on the right hand side of
the hob. The griddle is made of cast iron and the surface is covered with a special non-
stick finish. To protect the non-stick coating never use metal cooking utensils as they
may scratch the surface. Wooden or heat resistant plastic utensils may be used. Do
not use saucepans on the griddle plate.
UNDER NO CIRCUMSTANCES MUST THE GRIDDLE PLATE BE USED OVER ANY
OTHER HOTPLATE BURNERS.
USE OF THE GRIDDLE
The griddle may be used with either or both of the burners on, depending on the food
being cooked. The griddle can be positioned with the ridged portion at the front or at
the rear.
1. Secure the griddle above the two simmer burners, on the right hand side of
the hob, making sure that the support feet are located correctly on the pan
support fingers.
2. Press the ignition button and then push in and turn the control knob(s) of the
burners anticlockwise to the large flame symbol.
Continue to press the ignition button until the spark lights the gas.
Preheat the griddle plate for approximately four minutes.
3. Place the food directly on the griddle plate. However when cooking drier
foods eg. drop scones the griddle plate can be lightly greased.
4. The controls can be left at high for the sealing of foods or turned down to a
lower heat setting depending on what food is being cooked. NB. A gentle
heat is all that is required for the majority of griddling. Once the griddle plate
is up to temperature it maintains the cooking temperature on a medium/low
setting.
5. Cook the food for the required time, which will depend on the type of food
being cooked.
6. To turn off, push in and turn the control knob(s) fully clockwise to the O .
position.
7. Allow the griddle plate to cool before cleaning.
In the event of the burner flames being accidentally extinguished, turn off the burner
controls and do not attempt to re-ignite the burners for at least 1 minute.
GRIDDLE
14