Workrite Sierra HX Pin Assembly Instructions for 2-Leg Pin models - Manual (Page 2)

2 Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Workrite Sierra HX™ 2-Leg Pin Workcenters - Assembly Instructions
A
Tabletop (size and shape differ for each model)
Qty: 1
I
5 /
32
" Allen Wrench
Qty: 1
Parts grouped by carton
1
Verify that you have all the hardware and tools needed for the assembly
Check your cartons against the list above to verify that you have all the parts needed.
You will also need the following tools:
#2 tip Phillips screwdriver or drill bit
#3 tip Phillips screwdriver or drill bit
If you do not have a Workrite tabletop,
you will also need:
⅛” pilot drill bit
Lay out the Legs (E), Leg Braces (B, C, and
E), and Leg Caps (F) on the floor in the proper
location.
or
b
a
b
B
Long Brace
Qty: 1
D
Leg
Qty: 1
F
Leg Cap
Qty: 1
E
Medium Brace
Qty: 1
C
Short Brace
Qty: 2
D
Leg
Qty: 1
G
¼-20 x ⅝” Button
Head Machine
Screws
Qty: 8
B
C
F
E
D
J
#12 x ½" Button
Head Machine
Screws
Qty: 12
F
Leg Cap
Qty: 1
H
#12 x ¾" Pan
Head Sheetmetal
Screw
Qty: 32
#10 x ⅜" Pan
Head Type 23
Screw
Qty: 36
OR
E
Medium Brace
Qty: 1