Clarke SUMMIT Wet/Dry Vacuum User Manual
Summit, Wet/dry vacuum
Form No. 78495C
10/02
Clarke
®
Printed in the U.S.A.
READ THIS BOOK
This book has important information for the use and safe operation of this machine. Failure to read
this book prior to operating or attempting any service or maintenance procedure to your Clarke
machine could result in injury to you or to other personnel; damage to the machine or to other property
could occur as well. You must have training in the operation of this machine before using it. If you
or your operator(s) cannot read English, have this manual explained fully before attempting to
operate this machine.
All directions given in this book are as seen from the operator’s position at the rear of the machine.
For new books write to:
Clarke
®
, 2100 Highway 265, Springdale, Arkansas 72764.
Wet/Dry
Vacuum
SUMMIT
Operator's Manual
Manuel d'utilisation
Libro de Instrucciones
Division of
Document Outline
- Operator's Manual
- Table of Contents
- INTRODUCTION
- IMPORTANT SAFETY INSTRUCTIONS
- SPECIFICATIONS
- GROUNDING INSTRUCTIONS
- HOW TO PREPARE THE MACHINE FOR OPERATION
- MACHINE OPERATION
- Parts and Service Manual
- 115 Volt Connection Diagram
- Wand and Tool Kit
- Assembly Drawing
- Assembly Parts List
- Squeegee Assembly
- SQUEEGEE ASSEMBLY INSTALLATION
- Electrical Schematic
- 230 Volt Connection Diagram
- ALTO® PRODUCT SUPPORT BRANCHES
- CLARKE TECHNOLOGY WARRANTY