Voltage Valet 2TL3I User Manual
Voltage Valet Accessories for electrical

Check Your Luggage With Confidence
The next time you fly use a Voltage Valet
Travel Sentry
™
Approved
Combination Lock
to safely lock your luggage. Airline check-in personnel and the TSA have been trained
to recognize locks with the
Travel Sentry
mark and know that your luggage can remain
locked during check-in. If an inspection is necessary during screening, TSA personnel will
use a
Travel Sentry
secured access device to open and relock your luggage.
Combination Lock Instructions:
The Voltage Valet Combination Lock is preset at the factory to open at 0-0-0. To set
your own combination, follow these simple steps:
1. Set the dials between the arrows to the opening combination, 0-0-0, and pull up
the shackle from the locking position.
2. Turn the shackle 180 degrees (1/2 turn) and push in.
3. Hold shackle depressed and turn 90 degrees (1/4 turn) in either direction.
4. Set the dials to your own combination.
5. Without moving the dials, return the shackle to the 180 degree position. Pull up
the shackle and return it to the original locking position. Your combination is
now set.
6. To lock, push the shackle in at the locking position and rotate one or more
of the dials.
TSA Search Indicator:
The TSA Search Indicator is preset to Green at the factory. It will turn from Green to
Red if the lock is opened by the TSA. If your TSA Search Indicator is Red when you
receive your luggage, immediately inspect it for the TSA Notification of Baggage
Inspection. If none is found, take your luggage to your airline’s baggage claim office
to determine if anything is missing or if anything has been added to your luggage. To
reset the TSA Search Indicator:
1. Set the dials to the opening combination and pull up the shackle.
2. Turn the shackle 180 degrees (1/2 turn) and push the shackle in reset
ting the
search indicator to Green.
3. Pull up the shackle and the lock is ready for use.
Voltage Valet Division
Hybrinetics, Inc.
225 Sutton Place
Santa Rosa, CA 95407
Made in Taiwan
©2007 HYBRINETICS
, INC
.
Patent No:
US 6.877.345
US 7.007.521
Model 2TL3I