Vinten Radamec Native Lens Drive (NLD) - Manual (Page 11)

11
Technical data
Weight 462 g (1.0 lb)
Height 3.6 cm (1.41 in.)
Length 13.5 cm (5.31 in.)
Width 9.0 cm (3.54 in.)
Current < 250 mA
Power input 24 to 50 V DC
Supported protocols
Input RS422
Output Fuji serial protocol and Canon serial protocol
Operating temperature 0 - 50°C (32 - 122°F)
Usage
The Vinten Radamec Native Lens Drive (NLD) is designed for use in television studios to interface between
robotic control systems and the camera lens (e.g. Canon or Fujinon). The lens control can either be serial
(with compatible lenses) or analog (via the lens hand control demand units).
Further information
For further information or advice regarding this NLD, please contact Vinten Radamec or your local Vinten Rad-
amec distributor (see back cover) or visit our website.
For details on installation, maintenance and spare parts, please refer to the Vinten Radamec NLD Technical
Manual and Illustrated Parts List (Publication Part No. V3977-4990) This is obtainable from Vinten Radamec
or your local Vinten Radamec distributor. For information on-line, visit our website at
www.vintenradamec.com
WARNING! 1. Do NOT attempt to use this product if you do not understand how to
operate it.
2. Do NOT use this product for any other purpose than that specified in the
Usage statement above.
3. Maintenance beyond that detailed in this Operators Guide must be per-
formed only by competent personnel in accordance with the procedures
laid down in the Technical Manual.