Chauvet Range - Manual (Page 4)

COLORado Range IP QRG
Page 4 of 8
AC Power This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
Mounting Before mounting this product, read the safety notes at the beginning of this
guide and on page 2 of the product’s user manual. Then, follow the
mounting procedure indicated in the Setup chapter of the user manual.
Product
Mounting
Diagram
Control Panel
Description
Button Function
Exits from the current menu or function
Enables the currently displayed menu or sets the currently
selected value into the selected function
Navigates upwards through the menu list and increases the
numeric value when in a function
Navigates downwards through the menu list and decreases
the numeric value when in a function
Programming For details on how to program this product, please refer to the product’s
user manual.
Password
After being prompted to enter the password, press:
, , , , and
Overhead Mounting
Floor Mounting
C Clamps
(not included)
Safety cable
(included)
COLORado Range IP QRG
Page 5 of 8
Menu Options
Main Level 2 nd Level 3 rd Level Description
STAT
RED
000~255
(0~100%)
User can combine Red, Green, Blue, White,
and Amber to generate a custom color.
GREEN
BLUE
WHITE
AMBER
STRB 00~20 (0~20 Hz) Select a strobe frequency
AUTO
AUTO
1~10
Choose from 10 automatic programs
CUSTOM Choose from 10 customizable programs
ADDR 001~512 N/A Sets the DMX starting address
RUN DMX/SLAV N/A Selects the DMX or SLAVE mode
PERS
TOUR
N/A
16-channel
ARC 1 3-channel
AR1.D 4-channel
ARC.3 5-channel
AR3.D 6-channel
AR3.S 7-channel
HSV 3-channel
BLOCK 10-channel
SET
UPLD PSWD SEND END Uploads custom programs
REST PSWD RST END Resets the fixture to the factory settings
DIM
OFF Faders act linearly
DIM1~4 DIM1 (fastest)~DIM4 (slowest)
COLOR
OFF No color compensation
RGBW White is defined by CAL2 > RGB.W
UC Color compensation to match older fixtures
EDIT
PR
(1~10) SC
(01~30)
RED
000~255
User can combine Red, Green, Blue, White,
and Amber to generate a custom color.
GREEN
BLUE
WHITE
AMBER
STRB 00~20 Selects the strobe frequency (0~20 Hz)
TIME
000~255
Defines the step duration (0~100%)
FADE Defines the fade duration (0~100%)
CAL1 WH (1~11)
RED
000~255
User can combine Red, Green, Blue, White,
and Amber to generate whites with various
temperatures (TOUR > Channel 12). GREEN
BLUE
WHITE
AMBER
CAL2 RGB.W
RED
000~255
User can combine Red, Green, and Blue to
generate a balanced white (SET > COLOR
>RGBW))
GREEN
BLUE
WDMX
ACTI
ON/OFF
Activates W-DMX connection
REST Resets W-DMX connection
KEY ON/OFF N/A Turns the password on or off