C. Crane VersaCorder Dual Speed Recorder - Manual (Page 10)

1) To set the ON time, press the PROGRAM Button once. The number
“1” and “ON” will appear in the display.
Minutes PROGRAM #
DAY
Programmed
AM/PM
Setting
Hour
HOUR
DAY
MIN
2) Press the DAY Button until the desired day appears in the display.
Note: The VersaCorder can record any single day, weekends,
weekdays or everyday.
3) Select the appropriate hour by pressing the HOUR Button until the
desired hour appears in the display.
4) Select the appropriate minute by pressing the MIN Button until the
desired minute appears in the display.
5) To set the OFF time, press the PROGRAM Button once and OFF
will be displayed. Follow steps 2-4 above to set the appropriate OFF
time.If you are recording a four hour talk show that starts at 11:00 PM
on Monday, be sure to change the OFF time DAY to Tuesday.
If you wish to program another event, you can press the PROGRAM
Button again and event number “2” and “ON” will appear. Follow steps
2-4 to program your ON and OFF times.
After you have set the timer, you can press the CLOCK Button to return
to the clock display.
PROGRAM
Timer ON/OFF
6) Set the Timer Switch to ON and press the PLAY and RECORD Buttons.
Make sure the Voice Activation is “Off”.
Page 10 VersaCorder
Recording Instructions
Recording Using the Timer