Vetter ART Attack - Manual (Page 6)

Page 6/7
Airshore ART Attack
Producing an opening for extinguishing work
The spike is struck into the material to be opened (usually thin
plating). The opening can be expanded by turning the spike. This
enables extinguishing work to be carried out through the open-
ing.
This operating manual was carefully made
according to the best of our knowledge.
However it must be pointed out that all
dangers resulting from the application of
the tool cannot be foreseen.
Therefore the user is obliged to use the
tool in a responsible manner.
Application of the metal cutting claw 3.4
The ART Attack, with its metal cutting claw, is the ideal tool for
breaking-through and cutting thin plate (e.g. car roofs and bon-
nets, aircraft and thin-walled structures).
Maintenance and care 3.5
After use, the tool must be cleaned with water, a neutral cleaning
agent and a scrubbing brush. Drying can be made with a cloth.
Technical data 4.
Art.-No. Type Length in cm Weight in kg
7200 0003 00 ART-ATK 24 yellow 61 3.6
7200 0366 00 ART-ATK 24 Black edition 61 3.6
7200 0077 00 ART-ATK 30 yellow 76 4.1
7200 0367 00 ART-ATK 30 Black edition 76 4.1
7200 0054 00 ART-ATK 36 yellow 91.5 4.5
7200 0082 00 ART-ATK 42 yellow 106.5 5.0
All rights reserved for technical changes within the scope of product improve-
ment.
ART Attack with leverage claw or metal cutting claw
Art.-No. Type Length in cm Weight in kg
7200 0390 00 ART-ATK 30
with leverage claw
77,6 4,4
7200 0391 00
ART-ATK 30
with metal cutting claw
78.4 4.4
All rights reserved for technical changes within the scope of product improve-
ment.