Vetter pneumatic universal tent, 4 folding plan – Vetter Universal tents User Manual
Page 8
Vetter Pneumatic Universal Tent
Page 7/12
4.4 Folding Plan
Before repacking, tent frame must be completely empty.
1. The front of the tent is folded lengthwise in four equal sec-
tions.
2. Then fold the PZ 12 four times in the direction of the inflation
connector. All other tent types are folded five times.
3. Now place the tent into the carrying bag.
Inflation
connector
See also other documents in the category Vetter Safety:
- MT 20 (13 pages)
- Accessories Tents (101 pages)
- Decon tents (12 pages)
- Decon showers (8 pages)
- S.Tec Lifting bags 10 bar (145 psi) (19 pages)
- S.Tec Lifting bags 10 bar (145 psi) Test Equipment (29 pages)
- Mini Lifting bags 8 bar (116 psi) (20 pages)
- Ultra Flat Bags 8 bar (116 psi) (17 pages)
- Wedge Lifting bags (13 pages)
- Lifting bags 1 bar (14.5 psi) (16 pages)
- Ultra Flat Bags STec 10 bar (145 psi) (16 pages)
- SP 16 (16 pages)
- SP 25 (16 pages)
- SP 60 (31 pages)
- Rescue paths (7 pages)
- Leak sealers (39 pages)
- Pipe sealing bags and bypass bags FS (18 pages)
- Pneum. collection containers (7 pages)
- Pneum. collection tubs 0.3 bar (8 pages)
- Pneum. collection tubs PVC 0.3 bar (8 pages)
- Water tanks (7 pages)
- Mini Permanent Aspirator MPA 2.0 MWF(EU) (200 pages)
- Mini Permanent Aspirator MPA 2.0 MWF(EU) Safety (96 pages)
- Permanent aspirator (35 pages)
- Oil water debris aspirator (30 pages)
- Struts and Accessories (24 pages)
- Lite Vehicle Stabilization Kit (7 pages)
- ART Attack (7 pages)
- Litepod ART-LP (29 pages)
- Pipe and Test Sealing Bags (33 pages)
- Short packers (15 pages)