Vetter Universal tents - Manual (Page 11)

Page 10/12
7. Repair Instructions
Minor damage such as cracks, cuts, or punctures (max. 4 cm) can
be repaired by the operator with the enclosed repair kit. Please
follow these steps:
1. Select the size of the patch so that the patch extends approx.
4 cm beyond the damaged area on all sides.
2. Mark patch area on the supporting frame.
3. Roughen the area of the patch on the surface of the suppor-
ting frame as well as one side of the patch.
4. Apply a thin layer of the special adhesive to the roughened
spot on the supporting frame and the roughened side of the
patch.
5. Allow special adhesive to dry for approx. 10-15 minutes until
no longer sticky.
6. Press patch firmly onto the pretreated area of the supporting
frame and smooth out.
7. Allow unpressurized supporting frame to rest for at least 48
hours.
Only the factory is able to repair damage that is more ex-
tensive.
A trained technician must check the tent and its supporting frame
for leaks after the repairs.