Vetter Decon tent - Manual (Page 4)

Vetter Pneumatic Decon Tents
Page 3/11
2.2 Optional accessories
Article No. Description
1523003700 Valise for PZ 17 Decon 2 L, 265 x 150 cm (104 x 59 inch), yellow, Incl. auto belt latch
1523013300 Valise for PZ 40 3 L, 330 x 160 cm (130 x 63 inch), yellow, incl. auto belt latch
2.3 Correct handling and usage
Always use compressed air with the pneumatic decon tents - ever use flammable or aggressive ga-
ses. Only Vetter original fittings and parts may be used for the pneumatic decon tents.
2.4 Safety instructions
Only trained, reliable, and responsible employees are permitted to use and operate this product.
Wear the required protective gear and clothing. Please contact the manufacturer or authorized re-
tailer when detecting cracks, fissures, holes, or leakages on the pneumatic supporting frame during
the product inspection. Such defects can lead to bursting. Always avoid contact with hot or sharp-
edged materials.
Due to the light design of the pneumatic tents, it is possible that heavy
winds may cause stability problems.
Always fasten tents with anchoring ropes or use ballast containers. Comply with DIN 7716 if storing
the pneumatic universal tents long-term.
3. Preparing the product for use
3.1 Preparations for operation
Inspect the pneumatic decon tent before and after each operation to ensure correct and perfect
condition. It is imperative that the recommended folding instructions be observed.