Vetter Decon tent - Manual (Page 11)

Page 10/11
6. Press patch firmly onto the pretreated area of the supporting
frame and smooth out.
7. Allow unpressurized supporting frame to rest for at least 48
hours.
Only the factory is able to repair damage that is more ex-
tensive.
A trained technician must check the tent and its supporting frame
for leaks after the repairs.
8. Technical data
Type PZ 17 Decon 2 L PZ 40 3 L *
Article No. (Set) 1520047000 1520035500
Size outside (L x W x H)
m 4.9 x 3.86 x 2.48 8 x 5.5 x 3.1
ft. 16 x 13 x 8 26 x 18 x 10
Size inside (L x W x H)
m 4.9 x 3.5 x 2.3 8 x 5.1 x 2.9
ft. 16 x 12 x 8 26 x 16 x 9
Working pressure
bar 0.5 0.5
psi 7.25 7.25
Test pressure
bar 0.65 0.65
psi 9.4 9.4
Nominal capacity
l 1,776 4,576
cu. ft. 62.72 161.6
Air requirement
l 2,664 6,863
cu. ft. 94.1 242
Inflation time ca. sec 60 300
Pack size (L x W x H)
m 1.1 x 0.85 x 0.6 1.1 x 0.85 x 0.85
ft. 3 x 2 x 1 3 x 2 x 2
Weight
kg 105 204
lbs 231 450
* Also available as a 40 m² tent with 2 lines. PZ 40 2 L (1520048900)
All rights reserved for technical changes within the scope of product improvement.