Universal Remote Control (URS) MRX-4IR - Manual (Page 8)

Page 5
MRX-4IR N
ETWORK
B
ASE
S
TATION
Network Installation
WARNING!! Before proceeding, a Custom Professional is required
to install and configure your MRX-4IR.
The MRX-4IR is a network base station that allows full control of
your components with the use of Total Control MRX Advanced
System Controllers and compatible interfaces. Once installed on the
network, and a button is pressed on an interface, a command is
transferred over the customer’s network to the MRX Advanced
Network System Controller, which in turn is routed to the MRX-4IR
and then sends IR commands to the components you specify.
1. Connect the MRX-4IR onto the network (wired or wireless).
2. Connect your laptop into the same network as the MRX-4IR.
MRX-4IR
Wi-Fi Router