Universal Remote Control (URS) MRX-4IR User Manual

Page 7

Text mode
Original mode

Page 4

Bottom Panel

The bottom panel consists of:

Reset Button: The Reset button is located on the bottom of the unit,
and requires a stylus, or paper clip to press the button. Pressing the
Reset button will cycle the MRX-4IR’s power. (Unplugging the MRX-4IR’s
power cable and then plugging it back in, also performs the same
function.)

Pressing and holding the Reset button for 15 seconds, will factory
default the MRX-4IR, and return the unit back to its original
unprogrammed state.

Mac Address Sticker: The MAC Address (12 numbers) identifies this
wireless device when connected to the network.

IR Attenuator: Use the included adjustment tool (or a flathead screwdriver)
to increase or decrease the intensity level for IR output #1.

MRX-4IR N

ETWORK

ASE

TATION