Culligan 2 - Manual (Page 13)

10
HAND VALVE BY-PASS
If hand valves are closed, close the inlet and outlet valves and open the center
by-pass valve. To get soft water, reverse the process by closing the center
by-pass valve and opening the inlet and outlet valves. NOTE: If the media tank
is to remain connected while the conditioner is in by-pass, close the inlet valve
ONLY, and open the by-pass valve. This will prevent a possible pressure
build-up in the media tank.
NOTE:
When the conditioner is by-passed, all water is hard. For example, your water
heater may fill with hard water, and the conditioner cannot recharge. Remem-
ber to place the push-button Cul-Flo-Valv
®
or hand valves back to the “Soft
Water” position as soon as possible.