Universal Remote Control (URS) MRX-4IR 7.11.14 - Manual (Page 9)

Page 6
MRX-4IR N
ETWORK
B
ASE
S
TATION
Network Discovery & Download
WARNING!! Before proceeding, a Custom Professional is required
to install and configure your MRX-4IR.
1. Open a new or current project. In Step 3: Add URC Devices, add
an MRX-4IR to a room included in your project which represents
the physical location of the unit.
2. In Step 6: Network Setup, discover the MRX-4IR using the same
process used for other Total Control network products in the
project.
3. Press the Download button within the Program menu.
4. Make sure to check the MRX-4IR checkbox, then press the
Download to Selected Devices (Direct) button.