Pairing a trf-ge1 and a trg-100/200 – Universal Remote Control (URS) MRX-2 7.11.14 User Manual
Page 7
TRF-GE1 G E
XTENDER
Pairing a TRF-GE1 and a TRG-100/200
Before you can begin to use the TRF-GE1 G Extender with the
TRG-100/200 Umotion remote, it is necessary to pair them. The
TRF-GE1 G has a Pairing button on the bottom of the unit, this
makes pairing possible without the use of a PC.
Entering Pairing mode:
1. Use a stylus or paper clip to press and hold the Pairing
button (on the bottom of the TRF-GE1 G) for three
seconds.
2. When in pairing mode, press and hold the Main and Sel
buttons for three seconds on the TRG-100/200 remote.
3. Once paired, both the TRG-100/200’s Umotion button
and the TRF-GE1 Status light will flash three times.
Keep in mind, although multiple TRG-100/200’s can pair with one
TRF-GE1 G Extender it is recommended that only one* TRG-100/200
control the on-screen menu.
*Multiple Umotion remotes paired to a single TRF-GE1 may cause
the unit to respond sluggishly.
Roaming throughout your home with a TRG-100/200, is NOT
recommended since it can only be paired with one TRF-GE1 G
Extender and work within its 30 – 50 feet range.
Page 4