Smartmedia card error messages, E-55, Using a smartmedia card – Casio LK93TV User Manual
Page 57
E-55
SmartMedia Card Error Messages
Display Message
Cause
Action
Err Card R/W
Err No Card
Err Format
Err Protect
Err SizeOver
Err WrongDat
Err Not SMF0
Err No File
Err Fragment
There is something wrong with the card.
(1) The card is not set correctly in the card slot.
(2) There is no card in the card slot or the card was
removed part way through a card operation.
(1) The format of the card is not compatible with
this keyboard.
(2) The card is damaged.
The card is write protected.
The SMF data you are trying to read is larger than
120 Kbytes.
The SMF data is corrupted or the wrong format.
You are attempting to play SMF data that is not
Format 0.
You are trying to read data from a card that does not
contain any SMF data that is supported by this keyboard.
The card data you are trying to use for playback or
Karaoke is fragmented.
Use a different card.
(1) Remove the card and reinsert it correctly (page E-53).
(2) Insert a card into the card slot. Never remove a
card from the card slot while a card access
operation is in progress.
(1) Change to a card that has the proper format.
........................................................................ E-53
(2) Use a different card.
• Use a different card.
• Remove the card’s write protect sticker to enable
data storage. ................................................. E-52
Press the CARD button to return to the SMF data
selection screen, and then select different SMF data
that is smaller than 120 Kbytes (page E-54).
Use different data.
Use only Format 0 SMF data.
Load a card that contains SMF data that is
supported by this keyboard.
Perform either of the two followng operations.
• Without deleting the original (fragmented)
data, perform a “save as” operation to save
the data under a different name. Next, try
performing the operation using the newly
saved data.
• If you saved the data to the card from another
location, format the card (which will delete its
contents), and then save the data to the card
again. Next, try performing the operation using
the newly saved data.
Using a SmartMedia Card
659A-E-057A