Cobra Electronics CPI 300 User Manual
Page 9
12
10
LIMITED 2-YEAR WARRANTY
©
Cobra Electronics Corporation
6500 West Cortland Street
Chicago, Illinois 60707 USA
2
Cobra Electronics Corporation warrants
that its Cobra
®
Power Inverter, and the
component parts thereof, will be free
of defects in material and workmanship
for a period of two (2) years from the
date of consumer purchase. This
warranty may be enforced by the first
consumer purchaser, provided that the
product is utilized within the U.S.A.
Cobra
®
will, without charge, repair or
replace, at its option, a defective
inverter upon delivery to the Cobra
®
Factory Service Department,
accompanied by proof of the date
of first consumer purchase, such as
duplicated sales receipt.
You must pay initial shipping
charges required to ship the product
for warranty service, but the return
charges will be at Cobra’s expense, if
the product is repaired or replaced
under warranty.
This warranty gives you specific
rights, and you may also have
other rights which vary from state
to state.
Exclusions: This limited warranty
does not apply 1) to any product
damaged by accident; 2) in the
event of misuse or abuse of the
product or as a result of
unauthorized alterations or repairs;
3) if the serial number has been
altered, defaced or removed;
4) if the owner of the product
resides outside the U.S.A.
All implied warranties, including
warranties of merchantability and
fitness for a particular purpose are
limited in duration to the length of
this warranty.
Cobra
®
shall not be liable for any
incidental, consequential or other
damages; including, without
limitation, damages resulting from
loss of use or cost of installation.
Some states do not allow limitations
on how long an implied warranty lasts
and/or do not allow the exclusion or
limitation of incidental or
consequential damages, so the above
limitations may not apply to you.
9
SPECIFICATIONS
11
Specifications
1.
Continuous output power (4 hours)
300w
2.
Continuous output power (30 minutes)
360w
3.
Surge rating (0.1second)
550w
4.
Peak efficiency (12V—1/2 load)
90%
5.
Efficiency (full load, 12V)
>83%
6.
No load current draw
< 0.1 A (12.6V)
7.
Output waveform (resistive load)
Perfect modified
sine wave
8.
Output frequency
60HZ±2HZ
9.
Output voltage
110V+/-5%
10. Input voltage
10-15 VDC
11. Alarm voltage (unload)
10.7 V ±0.3V
12. Shutdown voltage (unload)
10.0V ±0.3V
13. Operating temperature range
-10° C-40° C
14. Storage temperature range
-40° C to 85° C
15. Protection Overload, short-circuit, Overtemp
16. Reverse polarity, under/over voltage
Notes: All protection is
automatically recovered.
To protect the battery, if the
unit needs to be restarted after
low voltage protection, the
voltage of DC input should be
above 12V.
The unit is completely
insulated in input and output
for added safety.