Symtech ATF 1 - Manual (Page 3)

2
Introduction
Thank you for purchasing Symtech Corporation’s
ATF1Automatic Transmission Fluid Exchange
System. The ATF1is state of the art and incorporates the latest technology and techniques to
quickly perform all required periodic maintenance services for automatic transmissions. It is
extremely easy to operate, environmentally safe, and designed for the highest efficiency.
The Operations Manual MUST be read and COMPLETELYUNDERSTOOD in order to
properly operate the unit and experience the highest return on investment. Refer to the manual in
the future for continued safe operation. If you encounter difficulties in the operation,
understanding of procedures, or have general service questions, please do not hesitate to call us at
888-884-8182.
Please record the purchase date, serial number and distributor purchased from below for future
reference and assistance on technical issues.
Purchase Date:_______________________
Serial Number:_______________________
Located on Back of Unit
Purchased From: __________________________________
__________________________________
__________________________________
Initial Battery Charging (no less than 4 hours)
Prior to performing the first transmission fluid exchange, it is recommended to charge the battery
for eight (8) to ten (10) hours before operating the ATF 1 for the first time by plugging the power
cord into a 110VAC power source.
T1-