Symtech SCA 1 With Line Laser - Manual (Page 4)

1. GENERAL
1.1 INTRODUCTION
The Model “SCA 1
ISOColor” Visual Headlamp Alignment System is an economical optical alignment
tool that functions under the same principle for accuracy and dependability of an aiming screen, with the
added benefit of Symtech Corporation’s “
ISOColor” technology, without the excessive use of valuable
shop space and the confusion of vertical and horizontal lamp placement. System design and operation has
been engineered with the technician in mind. The “SCA 1” features “
ISOColor” technology that
facilitates headlamp alignment, with profitability and customer satisfaction as the end result.
The Model “SCA 1” is designed, manufactured and serviced by Symtech Corporation, Lees Summit,
Missouri, the industry leader in headlamp alignment technology to the service and body repair industries,
the architect of the Model “LCA 2 EZ” Visual, “CVA 3 EZ
ISOColor” Visual and the ”HBA 5” Electronic
Headlamp Alignment systems along with the “AIM 200” Headlamp Intensity meter.
We are confident that the “SCA 1
ISOColor” will provide you with years of exceptional service. Thank
you for selecting a Symtech “Safety by Design” product to address your headlamp alignment needs.
1.2 SYSTEM COMPONENTS
3
1.3 LASER WARNING
AVOID LOOKING DIRECTLY INTO LASER
LIGHT – POSSIBLE EYE INJURY CAN
OCCUR.
SIGHTING UNIT
Small Parts Package
2 Large Nylon Washers
2
5 /
16
” Nylon Washers
2 ¼” x 1 /
8
” (WHITE)Nylon
Spacers
2 ¼” x 3 /
16
” (BLACK)Nylon
Spacers
2 5 /
16
” Self-Locking Nuts
4 ¼” x 20 Machine Screws
1
3
/
8
” Self Locking Nut
1 3 /
8
” Flat Washer
D A N G E R
L A S E R R A D IA T IO N
A V O ID D IR E C T E Y E E X P O S U R E
P E A K P O W E R < 5 m W
W A V E L E N G T H 4 0 0 -7 0 0 n m
C L A S S IIIA L A S E R P R O D U C T
Large Parts Package
2 5 /
16
” x 5 ½” Carriage Bolts
1 Floor Slope Handle
2 Wheels
1 Wheel w/Floor Slope
Eccentric
1 3” Rotational Bearing
BASE & WHEELS
FLOOR SLOPE
AXEL
OPTICAL HEAD
GLIDE PLATE
MAST
OPTIONAL
DUST COVER
P/N: 01016000
FLOOR SLOPE
LASER
Exploded
View
Rotational
Mount
1.4 WARNING, EXPOSURE TO DIRECT SUNLIGHT
DO NOT PLACE OR POSITION “SCA 1” SO THAT DIRECT SUNLIGHT ENTERS
FRONT LENS. DOING SO WILL CAUSE DAMAGE TO ISOColor SCREEN AND
VOID WARRANTY. Front lens acts like an enlarged magnifying glass which will
concentrate direct sunlight into a destructive high intensity beam on the aim screen.