beautypg.com

Training, Preparation, Operation – Snow Joe 324E-RM Plus 11-Inch 10-Amp Electric Snow Shovel with Light User Manual

Page 2: Clearing a clogged discharge chute, Maintenance and storage

background image

2

Training

• Read, understand, and follow all instructions on the

machine and in the manual(s) before operating this unit. Be
thoroughly familiar with the controls and the proper use of
the equipment. Know how to stop the unit and disengage
the controls quickly.

• Never allow children to operate the equipment. Never allow

adults to operate the equipment without proper instruction.

• Keep the area of operation clear of all persons, particularly

small children and pets.

• Exercise caution to avoid slipping or falling.

Preparation

• Thoroughly inspect the area where the equipment is to be

used and remove all doormats, sleds, boards, wires, and
other foreign objects.

• Do not operate the equipment without wearing adequate

winter garments. Avoid loose fitting clothing that can get
caught in moving parts. Wear footwear that will improve
footing on slippery surfaces.

• Do not attempt to clear snow from a gravel or crushed rock

surface.This product is intended for use only on paved
surfaces.

• Never attempt to make any adjustments while the motor

is running (except when specifically recommended by
manufacturer).

• Always wear safety glasses or eye shields during operation

or while performing an adjustment or repair to protect eyes
from foreign objects that may be thrown from the machine.

Operation

• Do not put hands or feet near or under rotating parts. Keep

clear of the discharge opening at all times.

• Exercise extreme caution when operating on or crossing

gravel drives, walks, or roads. Stay alert for hidden hazards
or traffic.

• After striking a foreign object, stop the motor, thoroughly

inspect the snow shovel for any damage, and repair the
damage before restarting and operating the snow shovel.

• If the unit should start to vibrate abnormally, stop the motor

and check immediately for the cause. Vibration is generally a
warning of trouble.

• Stop the motor whenever you leave the operating position,

before unclogging the rotor blade housing or discharge
chute, and when making any repairs, adjustments or
inspections.

• When cleaning, repairing, or inspecting the snow shovel,

stop the motor and make certain that the rotor blades and all
moving parts have stopped.

• Exercise extreme caution when operating on slopes.
• Never operate the snow shovel without proper guards and

other safety protective devices in place and working.

• Never direct the discharge toward people or areas where

property damage can occur. Keep children and others away.

• Do not overload the machine capacity by attempting to clear

snow at too fast a rate.

• Look behind and use care when backing up with the snow

shovel.

• Disengage power to the rotor blades when snow shovel is

transported or not in use.

• Never operate the snow shovel without good visibility or

light. Always be sure of your footing, and keep a firm hold on
the handles. Walk; never run.

Clearing a Clogged Discharge Chute

Hand contact with the rotating rotor blades inside the
discharge chute is the most common cause of injury
associated with snow shovels. Never use your hand to clean
out the discharge chute.

To clear the chute:

• Shut the motor off!
• Wait 10 seconds to be sure the rotor blades have stopped

rotating.

• Always use a clean-out tool, not your hands.

Maintenance and Storage

• Check all fasteners at frequent intervals for proper tightness

to be sure the equipment is in safe working condition.

• Always refer to the Operator’s Manual for important details if

the snow shovel is to be stored for an extended period.

• Maintain or replace safety and instruction labels, as

necessary.

• Run the machine a few minutes after throwing snow to

prevent freeze-up of the rotor blades.