Inserting zippers and piping, Hand-look quilt stitch, Straight stitch with auto tie-off function – SINGER SEQS-6700 FUTURA QUARTET Instruction Manual User Manual
Page 23
21
02
Needle to left of foot
Needle to right of foot
INSERTING ZIPPERS AND PIPING
SETTINGS: Presser foot - Zipper Foot
Use the zipper foot to sew to the right or left of the zipper. It
can also be used to make or insert piping.
INSERTING ZIPPERS
To sew down the right side, attach left side of zipper foot to
presser foot holder so that the needle passes through the
opening on the left side of the foot.
To sew down the left side, attach right side of foot to foot
holder.
PIPING
&UHDWH D SLSLQJ E\ FRYHULQJ D ¿OOHU FRUG ZLWK D ELDV VWULS RI IDEULF
Attach the right side of the zipper foot to the foot holder so that
the needle passes through the right side of the zipper foot.
%DVWH WKH VHDP DOORZDQFHV WRJHWKHU HQFORVLQJ WKH ¿OOHU FRUG
forming seam tape for the piping.
Helpful Hint: Slight adjusting of the needle position to
sew closer to the piping may be accomplished with
the Stitch Width Control.
HAND-LOOK QUILT STITCH
This stitch is designed to look like hand sewing for topstitching
and quilting.
1. Thread bobbin with desired top stitching color.
2. Thread the needle with either invisible thread or with thread
that is a color which blends in with the fabric color, so it
doesn’t show.
3. Increase thread tension toward 6 or higher until you
achieve the desired appearance.
4. Set the stitich length at 4 (maximum).
5. Start to sew.
STRAIGHT STITCH WITH AUTO
TIE-OFF FUNCTION
1. Press the foot control and the machine will sew 4 stitches
forward and then 4 stitches in reverse and continue to sew
forward until the foot control is released.
2. Press the reverse button and the machine will sew 4
stitches in reverse and then 4 stitches in forward and stop.
16