How to operate the compact steam press, Before plugging into outlet, Filling the water tank – SINGER CSP1 PRO6S Compact Steam Press User Manual
Page 7: Model csp1
MODEL CSP1
HOW TO OPERATE
THE COMPACT STEAM PRESS
1. Before Plugging into Outlet
Check the voltage printed on the bottom of the Press
to be sure it is the same as your line voltage.
Place Compact Steam Press 1 on a firm level
surface.
2. Filling the Water Tank
CAUTION: Always disconnect press from electrical
outlet when filling with or empty water. Fill the Water
Tank with the ironing arm in the raised position. Be
careful to avoid spilling water over press when filling.
Make sure the Drain is closed by plugging in the Drain
Knob 'A' in the direction of the arrow.
Unscrew Water Tank Cap 'B' in the direction of the
arrow and remove.
Using the Water Container, slowly pour up to 2/3 cups
(150cc) of water into the Water Tank Fill Hole 'C'.
Replace Tank Cap and tighten.
07