SINGER 14T967DC-WORKBOOK QUANTUMLOCK - Manual (Page 150)

4. While holding the thread, firmly, pull the thread between the tension disks.
5. Turn the handwheel toward you until the lower looper extends 5-10mm
(approximately ½ inch) from the needle plate edge.
6. Thread the looper area of the machine following the red color coded
thread guides 4-10.
7. Place the thread slighty from left and
to the right of threading guide .
8. Place the thread slightly from the
front and to the back of threading
guide .
9. Place the thread through , and .
Five-Thread Safety Stitch Wide page 9