SINGER 9970 - Manual (Page 35)

35
7. Machine will sew the buttonhole in the order as
shown and stop automatically after sewing.
8. Press the thread cutter button and raise the
presser foot to remove the fabric.
To sew over same buttonhole, raise presser
foot to return to original position.
9. Cut center of buttonhole being careful not to cut
stitches on either side. Use a pin as a stopper.
CAUTION: To prevent accidents.
When using seam ripper, do not put your finger in
the path of ripper.
A. Note:
For sewing buttonholes on hard-to-sew fabrics or
along the edge of multi-layered garments, install
the underplate. Place the fabric between the
underplate and buttonhole foot.
1 2 3 4 5 6
1 2 3 4 5
1 2 3 4
1 2 3 4 5 1 2 3 4
1 2 3 4 5
1 2 3 4
1 2 3 4
1 2 3
1 2 3 4 5