Seca 763 printer-module - Manual (Page 9)

9
Setting the clock
– To reach setting mode, press the
FUNC/SET ( BMI ) key for about 2 sec-
onds.
Depending on the version of the scale,
the year will appear immediately or ad-
ditional menu items will appear.
If additional menu items appear, use the
arrow keys to select the
TIME menu
item and then press the FUNC/SET
( BMI ) key to reach the settings menu.
The year appears in the display.
– Use the arrow keys to set the correct
year.
– Press the FUNC/SET ( BMI ) key to con-
firm the year information entered. This
simultaneously switches you to the next
value you can set. Change this value
too using the arrow keys and confirm
the entry using the
FUNC/SET ( BMI )
key.
Set all the values for the clock correctly
in the same way. The sequence of val-
ues is year, month, day, hour, minute.
On clocks with a 12-hour display,
A ap-
pears on the left of the display for morn-
ing times and
P for afternoon and
evening times.
– After you have confirmed the minutes
using the FUNC/SET ( BMI ) key, you
exit the settings menu automatically
and the clock continues to run at the
time set.
If you also require seconds to be set accurately, then proceed as follows:
– set a minute which is still to come, but
do not confirm it using the FUNC/SET
( BMI ) key. As soon as the set minute
starts, press the FUNC/SET ( BMI ) key.
At that point, the clock will start running
at 00 seconds and the set minute.