Sage Tea Maker BTM800UK - Manual (Page 27)

26
PAge heAder..... CAre & CLeAnInG
noTe
Through regular use over time, scale
build-up can affect the performance
and the life of the Tea Maker™. Lime
and phosphate are common forms
of scale that can damage your Tea
Maker™. Lime scale, a harmless
mineral, comes in the appearance of
white-coloured or rusty looking build
up on the inner walls and inner base
of the glass jug. Phosphate scale can’t
be seen, however, it can cause the
water to appear cloudy when heated.
To prevent scale from damaging your
Tea Maker™, ensure to de-scale the
glass jug regularly. Use a commercial
de-scaling agent and follow the
instructions that come with the agent.
Ensure the Tea Maker™ is turned OFF by
pressing the TEA|Cancel button (when
brewing tea) or the HOT WATER|Cancel
button (when heating water) on the power
base. The Tea Maker™ is OFF when the
button surround illumination goes out.
Remove the power plug from the wall outlet.
noTe
Allow all parts of the Tea Maker™ to
cool completely before disassembling
and cleaning.
noTe
Only the jug lid, tea basket, tea basket
lid and tea scoop are dishwasher safe.
WARNING
Never immerse the BASE OF THE
GLASS JUG, POWER BASE, POWER
CORD or POWER PLUG in water or
allow moisture to come in contact with
these parts.
CLeAnInG THe JUG LId And
InTeGrATed SCALe fILTer
1. Wash the jug lid in warm soapy
water with a soft sponge, rinse and
dry thoroughly. The integrated scale
filter can be cleaned by placing
under running hot water and
rubbing with a cleaning cloth
or brush.
2. Alternatively, the jug lid is
dishwasher safe. Position the jug lid
vertically so the scale filter is facing
upwards. This will allow water to
drain properly.
3. Let all surfaces dry thoroughly prior
to using.