Sage Tea Maker BTM800UK - Manual (Page 24)

23
PAge heAder..... MoVInG THe TeA BASKeT
STAndBy Mode
When the Tea Maker™ is plugged into a wall
outlet, the LCD screen will illuminate for 3
minutes before entering standby mode.
To re-activate the Tea Maker™ out of standby
mode, press any button,
except the HOT WATER|Cancel or
TEA|Cancel button on the power base.
The LCD screen will re-illuminate.
Pressing either the HOT WATER|Cancel or
TEA|Cancel button will start the respective
operation immediately.
MoVInG THe TeA BASKeT WHen
noT In THe BreWInG CyCLe
After the brewing cycle is complete, you
may wish to lower the tea basket again
for extra infusion to produce a stronger
tasting tea. To do this, press and hold the
BASKET button for 2 seconds. The button
surround will flash and the tea basket will
automatically lower to the bottom of the
glass jug.
Once the desired strength has been
reached, press and hold the BASKET button
for 2 seconds. The button surround will flash
and the tea basket will automatically rise to
the top of the glass jug.
noTe
If the glass jug is removed from the
power base and the tea basket is in the
lowered position, it will automatically
return to the top -upon return of the
glass jug to the power base.