Sage Nutri Juicer Pro BJE820UK User Manual

Page 13

PAge heAder.....

aSSEmBlIng yoUr nEW aPPlIanCE

BEforE fIrSt USE

Before using your juice processor for the

first time, remove and safely discard any

packaging material and promotional labels.

Ensure the appliance is switched off

at the power outlet and the power cord

is unplugged.
Wash the filter surround, juice disc, puree

disc, puree insert, juicer cover, food pusher,

juice jug, juice jug lid and pulp container in

warm soapy water with a soft cloth or nylon

brush. Rinse and dry thoroughly.

for USE WItH JUICE ExtraCtor

Place the motor base on a flat dry

surface such as a bench top. Ensure

that the motor base is switched OFF

at the control panel, then switch the

appliance OFF at the power outlet

and unplug the cord.

Place the filter bowl surround on the
top of the motor base.

Align the arrows on the juice disc

with the arrows on the motor drive

coupling and push down until it

clicks into place. Ensure the juice

disc is fitted securely inside the

filter bowl surround and onto the

motor base.

Place the juicer cover over the filter

bowl surround, positioning the juicer

cover over the stainless steel filter

disc and lower into position.

Raise the safety locking arm up

and lock into the two grooves on

either side of the juicer cover. The

safety locking arm should now be in

a vertical position and locked into

place on top of the juicer cover.