beautypg.com

Option programming – Crimestopper Security Products CS-2000 User Manual

Page 8

background image

OPTION PROGRAMMING

1. Turn the Ignition ON and press the Override/Program button 5 times. After a slight delay, the system will flash the

lights 5 times.

2. Within the next few seconds, press the Override/Program button [again] the number of times that corresponds to

the feature list below. The siren will chirp for each button press. DO NOT LOSE COUNT!!

3. When you get to the desired option number, press the appropriate button on the transmitter according to the chart

below. Turn Ignition off. See Below for Option numbers, descriptions, and values. (Button 1 gives a single light
flash/chirp, Button 2 gives two light flashes/chirps, and Buttons (1+2) together gives three light flashes/chirps.)

4. Change ONE option at a time repeating steps 1-3 as needed. When you are finished customizing options, check

operation to see if the option(s) have changed.

PROGRAMMING OPTIONS CHART

* = Default Settings

Option # Option Description

BUTTON 1

LOCK

BUTTON 2

UNLOCK

BUTTONS (1+2)

TOGETHER

1.

Factory Horn Chirps / Pulses

Pulse with trip

only

Arm/Disarm Chirps

& Pulse with trip

Arm/Disarm/Warn Chirp &

Pulse with trip *

2.

Passive Arming /
Passive Chirp Countdown

ON

OFF*

Passive Arm with
Chirp Countdown

3.

Passive

Lock

ON

OFF*

4.

Ignition controlled Locks

ON*

OFF

Ignition Lock Only

5.

10/60 Sec. Door Open Warning

10 Sec.

60 Sec.*

6.

Active

Re-Arm

Enabled*

Disable

7.

Double Unlock Pulse

Disabled*

Enable

8.

Silent

Arm/Disarm

(Chirp Defeat w/Button 1)

Disabled*

Enable

9.

Parking Lights on with disarm

Enabled*

Disable

10.

Disarm with trunk pop

Disable

Enabled*

11.

Silent Arm/Disarm with Remote
(Button #2)

Enabled*

Disable

12.

Door Lock Pulse Time

0.75 Sec.*

3 Sec.

13.

Type of Carjack Protection

Active*

Active & Passive

Full-Time

14.

Carjack Features Enable/Disable

Disabled*

Enable

15.

L/UL or Arm/Disarm w/IGN ON

Lock/Unlock*

Arm/Disarm

NOTE: Options can be instantly restored to Factory Default Values: To restore default values: Perform step #1 above,
then press buttons (1+2) together. The siren will chirp 4 times and lights will flash 4 times. Turn OFF Ignition. All
programming options should be restored to “*” values (See chart above).

8