Power Plate my7 - Manual (Page 9)

Technical Specifications
WARNING: THE MACHINE
CONTAINS NO USER-SERVICEABLE
PARTS. PLEASE CONTACT AN
AUTHORIZED POWER PLATE
®
SERVICE PROFESSIONAL
FOR ANY MAINTENANCE OR
TROUBLESHOOTING NOT
OTHERWISE DESCRIBED BELOW,
OR PERSONAL INjURY OR DAMAGE
TO THE MACHINE COULD RESULT.
CAUTION: Any changes, modifications
or unauthorized maintenance performed
to or on the machine could void the
product warranty.
Always unplug the machine and then
wait for at least one minute before
performing any maintenance.
Clean the machine only with a moist
cloth. Do not use sharp objects, bristles,
scrubs or acid-based detergents, which
will damage the lacquer finish.
Do not spray any cleaning solution
directly onto the machine. Instead,
moisten a cloth, then apply to the
machine.
On plastic components, use only
polishes specifically designed for
plastic. Use a soft brush, not a cloth,
to clean the platform, including the
contoured mat.
Clean electrical components only with
a dry cloth, in order to avoid the risk of
shock or damage to the components.
Troubleshooting
Always unplug the machine and then
wait for at least one minute before
performing any troubleshooting.
If the machine is not operational and the
console display is not illuminated, check
the power connections to the machine.
If all power connections are working,
please check the circuit breaker or fuse
for the electrical outlet that is supplying
power to the machine in order to ensure
that the outlet is receiving electrical power.
If the console display is illuminated, but
the platform will not vibrate, unplug the
machine, wait at least one minute, then
check the connection to the machine’s
motor, located under the base of
the machine.
If the machine makes a rattling noise,
unplug the machine, wait at least one
minute, then check to make sure that
the feet are properly tightened.
DANGER: The user not try to resolve
any electrical issues regarding the power
source to the machine. Instead, Power
Plate requests that the user contact
a licensed, professional electrician to
conduct any examination and make any
necessary repairs. Otherwise, serious
personal injury or property damage
could result.
!
!
•
•
•
•
•
•
•
•
•
•
!
Maintenance
Power Plate ® my 7 ™ Technical Specifications
Color (standard) Graphite or Silverstone
Dimensions (W x D x H) 87cm x 80cm x 153cm / 35 in x 32 in x 61 in
Weight 179kg / 394.63lb
Power Supply 100-240V, 50/60 Hertz, Universal Voltage
Nominal Power 160-185W
Maximum Load 136.4kg / 300lb
Operation User-friendly interactive display
DualSync Twin Motor System DualSync Twin Motor System maintains precise balance at any
frequency and amplitude level, allowing perfect synchronization
of vibration for maximum muscle response and efficiency.
PrecisionWave Technology High-fidelity harmonic vibration system that provides
uncompromising performance for unsurpassed results.
Frequencies 30 - 40 Hertz (1Hertz increments)
Time Selections 0 - 9 minutes (15second increments)
Vibration Energy Output High or Low
G-Factor 1 30Hz/low amplitude
G-Factor 2 35Hz/low amplitude
G-Factor 3 40Hz/low amplitude
G-Factor 4 30Hz/high amplitude
G-Factor 5 35Hz/high amplitude
G-Factor 6 40Hz/high amplitude
Certifications MDD, CE and EMC (TUV certified); RoHS / WEEE compliant
Computer & Software Specifications
Operating System Windows CE 6.0 Professional
Software Power Plate proprietary My7 software (v1.0)
Graphics Built in Graphic Card
Total Memory Mobile-DDR SDRAM (133Hz) : 256MB
Hard Drive (Storage) 16GB micro-SD card
Screen/Monitor 10.1” LCD Display (800 x 480 pixel)
USB Port/Hub USB 1.0 Port x2
LAN port 10/100M Ethernet
Audio 2 x 2W
proMOTION™ Dynamic Vibration Technology Specifications
Resistance Levels 6 resistance levels. Pull toward front of the machine to increase
Push toward back of the machine to decrease.”
Cable Maximum 2.2m / 98.4in
0086
CERTIFIED CE 0086
14 15