Mercedes-Benz E 320 Wagon 1999 Operation Manual - Manual (Page 30)

50
4 Button for belt outlet height
adjustment
Raising:
Slide belt outlet upward.
Lowering:
Press button (4) and slide belt outlet
downward.
Caution!
For safety reasons, avoid adjusting the
seat or backrest into positions which
could affect the correct seat belt
position.
Rear-Facing Bench Seat
If the rear-facing bench seat is not
being used, slip the seat belt
webbings into the retainers (5).
Unfastening of Seat Belts
Push the release button (3) in the belt
buckle (2).
Allow the retractor to completely rewind
the seat belt by guiding the latch plate (1).
Operation:
The inertia reel stops the belt from
unwinding during sudden vehicle stops
or when quickly pulling on the belt.
The locking function of the reel may be
checked by quickly pulling out the belt.