272 operation – Mercedes-Benz SLR-Class 2007 User Manual
Page 273
272
Operation
Tires and wheels
̈
Press button
è or ÿ on the mul-
tifunction steering wheel repeatedly
until the standard display menu ap-
pears in the multifunction display
(
̈
Press button
k or j repeatedly
until you see the current tire inflation
pressures for each tire appear in the
multifunction display or the following
message appears in the multifunction
display:
Tire pressure
displayed only
after driving
a few minutes
̈
Press the reset button on the instru-
ment cluster (
The following message will appear in
the multifunction display:
Monitor current
tire pressure?
̈
Press button
æ.
The following message will appear in
the multifunction display:
Tire pressure monitor
reactivated
The TPMS will now monitor the tire in-
flation pressure values of all four tires.
The following message will appear in
the multifunction display field:
Tire pressure
displayed only
after driving
a few minutes
This display appears until the individual
tire inflation pressure values are
matched with the tires. The individual
values are then displayed
(
If you wish to cancel activation:
̈
Press button
ç.
If one of the following messages
appears in the multifunction display:
ț
Reactivate tire
pressure monitor
after correcting
tire pressure
ț
Please correct
the tire pressure
̈
Check the tire inflation pressures and
correct them if necessary.
̈
Reactivate the TPMS.
i
If you are transporting a deflated tire and/or
additional wheel sensors in the vehicle, do not
activate the TPMS until
ț
the deflated tire and/or additional wheel
sensors are no longer in the vehicle
ț
you have inflated the tire to the correct tire
inflation pressure
୴୴