Mercedes-Benz G-Class 2007 Owners Manual - Manual (Page 215)

214
Controls in detail
Loading
Cargo compartment cover blind
The cargo compartment cover blind can be
installed behind the rear seat bench.
1 Rear seat bench cover blind
2 Tailgate cover blind
Rolling out blind
̈ Grip the blind strap and pull blind 1
forward across the cargo compart-
ment.
̈ Engage blind into the mounts on the
rear seat backrest and release.
̈ Grip the blind strap and pull blind 2
rearward across the cargo compart-
ment.
̈ Engage blind into the mounts to the left
and right of the tailgate.
Rolling up blind
̈ Disengage blind 1 from the mounts
on the rear seat backrest and guide
retraction by its blind strap.
̈ Disengage blind 2 from the mounts to
the left and right of the tailgate and
guide retraction by its blind strap.
Removing and installing blind
1 Latch
2 Blind
Removing blind
̈ Roll the blind up ( ୴ page 214).
̈ Open latch 1 on the right and left side
of blind 2 in direction of the arrow.
̈ Pull blind 2 out upwards.
Installing blind
̈ Place blind into recesses.
̈ Press the right and left side of blind
down until blind locks into place.