Crimestopper Security Products CS-9704 - Manual (Page 8)

ACTIVE RE-ARMING:
Active Re-arming means that the system will re-arm itself 30 seconds after disarmed with the transmitter if a door
has not been opened. This is handy if the vehicle is accidentally disarmed without you knowing it. This feature
can also be turned off with the programming options.
OVERRIDE:
If you have lost the transmitter or it stops working for any reason and the Alarm is armed, you will have to open
the door with the key, which will activate the alarm. Turn the ignition on and press the override/program button
about 2 seconds. The Alarm will disarm and enter the Valet mode, which allows you to use the vehicle until you
can repair/replace the remote transmitter at which time you can take the vehicle out of valet.
ALARM PROGRAMMING OPTIONS
Programming options are accessed by turning the ignition on and pressing the override/program button 5 times
within 5 seconds. You will hear a 2 second chirp from the siren. Within the next 5 seconds press the
override/program button again the number of times that corresponds to the listed feature below. The siren will
chirp once for each button press. One you are at the desired option number, press the lock or unlock button on
the transmitter to change the option. If the lock button is pressed, 1 siren chirp will sound. If the unlock button is
pressed, 2 siren chirps will sound. Pressing TX button 2 for any of the options will change the selected option
from default to the alternate setting (i.e. pressing the unlock button when the option for Autolock is selected will
turn Autolock off. The Autolock feature is ON by default from the factory). See list below for option selections.
Option Number Feature Description Button #1 (Lock) Default Button 2 (Unlock)
1. Passive Arming ON OFF
2. Lock w/Passive Arm ON OFF
3. Autolock on/off ON OFF
4. 0.7 or 3 Second Lock Pulse 0.7 Sec. 3 Sec.
5. Double Unlock Pulse OFF ON
ALARM PROGRAMMING OPTIONS
SILENT ARM/DISARM PROGRAMMING:
8