Mercedes-Benz G-Class 2008 COMAND Manual - Manual (Page 48)

48
Audio
Radio operation
End scan function and play a station
̈ Press the Scan soft key again if you
hear the desired station.
or
The scan function stops automatically
when the first station received has been
scanned twice.
You can use the following functions:
ț Saving stations manually (FM, AM)
ț Saving stations automatically FM, AM
(
୴ page 49)
ț Selecting a station from the FM/AM
preset menu (
୴ page 50)
ț Selecting a station from the FM/AM
Auto presets (
୴ page 50)
Saving stations manually (FM, AM)
In the Radio main menu
̈ Activate the desired wave band
(
୴ page 44).
̈ Press one of the number keys, e.g. 2,
longer than 2 seconds.
You will hear a verification beep if the
beep tones option was activated in the
system settings (
୴ page 184).
The radio saves the current station at
the memory preset selected. The me-
mory preset selected will appear in the
status bar, e.g.
FM2
.
On the memory list
̈ Activate the desired wave band
(
୴ page 44).
̈ Press the
Presets
soft key.
The memory Preset menu will appear.
To select the desired memory preset:
̈ Push the joystick to H, h or g,
G to highlight the desired memory
preset.
or
̈ Press j or k at the
multifunction steering wheel.
Memory functions
i
There are 10 presets available
(
1 - 9, 0).
An existing entry is overwritten in the
memory list when a new input is given.