Mercedes-Benz SLK-Class 2008 COMAND Manual - Manual (Page 147)

147
Navigation*
During route guidance
You can select which POIs will appear as
symbols on the map.
̈ In the Display menu ( ୴ page 146)
press the Symbols soft key.
The available options appear.
̈ Use or to select an option.
̈ Press .
The selected option is activated. A solid
circle
designates an activated op-
tion.
ț Standard option:
The symbols for the system default
setting are displayed on the map;
ț Personal option:
The symbols to be displayed can be
selected from a list (
୴ page 147);
ț None option:
No symbols will be displayed on the
map.
Setting personal symbol display
̈ After activating the Personal option
( ୴ page 147), press the Change soft
key.
The list of available symbols appears.
̈ Use or to select a list entry.
̈ Press to activate or deactivate a se-
lected symbol depending on its previ-
ous state.
̈ Finally, press the Back soft key or wait
for the screen to change.
The setting is stored.
Setting symbols display
i
The symbols are on display only if the
map scale is set at 0.05 mi (50 m),
0.1 mi (100 m), 0.2 mi (200 m), or
0.5 mi (500 m).
To set the map scale ( ୴ page 133).
i
The Change soft key is only available if
the Personal option is selected. Other-
wise, it will appear shaded out.
i
Empty square = symbol deactivated
Solid square = symbol activated
Any number of symbols can be activat-
ed.