Mercedes-Benz SLK-Class 2011 Owners Manual - Manual (Page 237)

X Setting up: Tilt both plates upward :.
X Fold the lower plate outward ;.
X Guide the tabs of the lower plate all the way
into the openings of base plate =.
For information on where to place wheel
chocks when changing a wheel, see “Lifting
the vehicle” (
Y page 277).
Jack
G Warning!
Only use the jack supplied with your vehicle
to lift the vehicle briefly for wheel changes. If
you use the jack for any other purpose, you or
others could be injured, as the jack is
designed only for the purpose of changing a
wheel.
When using the jack, observe the safety notes
in the “Mounting the spare wheel” section and
the notes on the jack.
X Take the jack from the vehicle tool kit
(
Y page 234).
Storage position
X Turn the crank handle in the direction of
arrow as far as it will go.
Operational position
X Turn the crank handle clockwise.
Before placing the jack back into the vehicle
tool kit:
X Fully collapse the jack.
X Fold in the crank handle (storage position).
Spare wheel
G Observe Safety notes, see page 273.
The spare wheel is located in the space
underneath the trunk floor.
X Removing: Open the trunk ( Y page 59).
X Lift the trunk floor.
X Remove retaining screw ; by turning it
counterclockwise.
X Remove spare wheel :.
Where will I find ...?
235
Practical hints
171_AKB; 3; 60, en-US
d2ureepe,
Version: 2.11.8.1
2009-05-11T16:00:23+02:00 - Seite 235
Z