Mercedes-Benz E-Sedan 2012 Owners Manual - Manual (Page 230)

X Press the = or ; button on the
steering wheel to select the
Sett. menu.
X Press the : or 9 button to select the
Lights submenu.
X Press the a button to confirm.
X Press the : or 9 button to select the
Surround lighting function.
When the Surround Lighting function is
activated, the light cone and the area
around the vehicle are displayed in red in
the multifunction display.
X Press the a button to save the setting.
Deactivating delayed switch-off of the
exterior lighting temporarily:
X Before leaving the vehicle, turn the
SmartKey to position
0 in the ignition lock.
X Turn the SmartKey to position 2 in the
ignition lock and back to position 0.
The exterior lighting delayed switch-off is
deactivated.
Delayed switch-off of the exterior lighting is
reactivated the next time you start the
engine.
Activating/deactivating the interior
lighting delayed switch-off
If you activate the
Light. delay function,
the interior lighting remains on for 20
seconds after you remove the SmartKey from
the ignition lock.
X Press the = or ; button on the
steering wheel to select the
Settings
menu.
X Press the : or 9 button to select the
Lights submenu.
X Press the a button to confirm.
X Press the : or 9 button to select the
Light. Delay function.
When the Light. Delay function is
activated, the vehicle interior is displayed
in red in the multifunction display.
X Press the a button to save the setting.
Vehicle
Activating/deactivating the automatic
door locking feature
If you select the
Auto. Door Locks
function, the vehicle is centrally locked above
a speed of around 9 mph (15 km/h).
i For further information on the automatic
locking feature, see ( Y page 83).
X Press the = or ; button on the
steering wheel to select the
Settings
menu.
X Press the : or 9 button to select the
Vehicle submenu.
X Press the a button to confirm.
X Press the : or 9 button to select the
Auto. Door Locks function.
When the Auto. Door Locks function is
activated, the vehicle doors are displayed
in red in the multifunction display.
X Press the a button to save the setting.
Activating/deactivating the acoustic
locking verification signal
If you activate the
Acoustic Lock function,
an audible signal sounds depending on the
vehicle's date of manufacture:
R
when locking
or
R
once when unlocking and three times when
locking
X Press the = or ; button on the
steering wheel to select the
Settings
menu.
X Press the : or 9 button to select the
Vehicle submenu.
X Press the a button to confirm.
X Press the : or 9 button to select the
Acoustic Lock function.
If the Acoustic Lock function is activated,
the & symbol in the multifunction
display lights up red.
X Press the a button to save the setting.
228
Menus and submenus
On-board computer and displays