Mercedes-Benz E-Sedan 2012 Owners Manual - Manual (Page 227)

X To activate: press a again.
The å warning lamp in the instrument
cluster goes out.
Activating/deactivating PRE-SAFE ®
Brake
PRE-SAFE ® Brake is only available in vehicles
with DISTRONIC PLUS.
X Press the = or ; button on the
steering wheel to select the
DriveAssist
menu.
X Press 9 or : to select PRE-SAFE
Brake .
X Press a.
The current selection is displayed.
X To activate/deactivate: press a
again.
When PRE-SAFE ® Brake ( Y page 69) is
activated, the multifunction display shows
the Ä symbol as long as the HOLD
function is not activated (
Y page 187).
Vehicles with Parking Guidance: if
PARKTRONIC is activated and you are driving
at a speed under 22 mph (35 km/h) the j
symbol for Parking Guidance is displayed
instead of the Ä symbol.
Activating/deactivating ATTENTION
ASSIST
X Press the = or ; button on the
steering wheel to select the
DriveAssist
menu.
X Press the 9 or : button to select
Attention Asst. .
X Press a.
The current selection is displayed.
X To activate/deactivate: press a
again.
When ATTENTION ASSIST ( Y page 199) is
activated, the À symbol appears in the
multifunction display when the ignition is on.
Activating/deactivating Blind Spot
Assist
You can use the Blind Spot Asst. function
to activate or deactivate Blind Spot Assist
(
Y page 203) or Active Blind Spot Assist
( Y page 207).
X Press = or ; on the steering wheel
to select the
DriveAssist menu.
X Press 9 or : to select Blind Spot
Asst. .
X Press a.
If the function is activated, the monitored
areas are shown in red in the multifunction
display.
X To activate/deactivate: press a
again.
Activating/deactivating Lane Keeping
Assist
You can use the Lane Keep. Asst. function
to activate/deactivate Lane Keeping Assist
(
Y page 205) or Active Lane Keeping Assist
( Y page 210).
X Press the = or ; button on the
steering wheel to select the
DriveAssist
menu.
X Press the 9 or : button to select
Lane Keep. Asst. .
X Press a.
If the function is activated, the road
markings are shown in red in the
multifunction display.
X To activate/deactivate: press a
again.
If Lane Keeping Assist or Active Lane keeping
Assist is activated, the multifunction display
shows the à symbol when the ignition is
switched on.
Menus and submenus
225
On-board computer and displays
Z