beautypg.com

Towing a vehicle with both axles on the ground, Transporting the vehicle, Recovering a vehicle that has become stuck – Mercedes-Benz G-Class 2012 Owners Manual User Manual

Page 238: Breakdown assistance, Towing and tow-starting

background image

:

Towing eye, rear

Towing a vehicle with both axles on

the ground

It is important that you observe the safety
instructions when towing away your vehicle
(

Y

page 235).

G

WARNING

The power assistance for the steering and the
brake force booster do not work when the
engine is not running. You will then need
much more effort to brake and steer the
vehicle. Adapt your style of driving
accordingly.

X

Switch on the hazard warning lamps
(

Y

page 91).

i

When towing with the hazard warning

lamps switched on, use the combination
switch as usual to signal a change of
direction. In this case, only the turn signals
for the desired direction flash. When the
combination switch is reset, the hazard
warning lamps start flashing again.

X

Turn the SmartKey to position

2 in the

ignition lock.

X

When the vehicle is stationary, depress the
brake pedal and keep it depressed.

X

Shift the transfer case to neutral position
N (

Y

page 145).

X

Shift the automatic transmission to
position

N.

X

Release the brake pedal.

X

Release the parking brake.

i

The transmission can only change gear if

the battery has sufficient charge.
If you cannot move the selector lever to

N,

the propeller shafts to the driven axles
must be removed.

Transporting the vehicle

Use the towing eyes to pull the vehicle if it
needs to be transported on a trailer or
transporter (

Y

page 235).

X

Apply the parking brake.

X

Turn the SmartKey to position

2 in the

ignition lock.

X

Move the selector lever to

N.

X

Shift the transfer case to neutral position
N (

Y

page 145).

X

Secure the towing cable to the towing eyes.

X

Make sure that the vehicle cannot roll
away.

X

Release the parking brake.

X

Load the vehicle onto the transporter.

X

Apply the parking brake.

X

Shift the automatic transmission to
position

P.

X

Turn the SmartKey to position

0 in the

ignition lock and remove it.

X

Secure the vehicle.

!

Only lash the vehicle down by the wheels

or wheel rims, not by parts of the vehicle
such as axle or steering components.
Otherwise, the vehicle could be damaged.

Recovering a vehicle that has become

stuck

!

Pull away smoothly, slowly, and in a

straight line when pulling out a vehicle that
has become stuck. Excessive tractive
power could damage the vehicles.

236

Towing and tow-starting

Breakdown assistance