beautypg.com

Roadside assistance, Towing and tow-starting – Mercedes-Benz CLS-Class 2015 User Manual

Page 341

background image

X

Take cover ; off the opening.

X

Screw in the towing eye clockwise as far as

it will go and tighten it.

Removing the towing eye

X

Unscrew and remove the towing eye.

X

Position cover : on top of the bumper and

press it in at the bottom until it engages.

X

Attach cover ; to the bumper and press

until it engages.

X

Place the towing eye in the vehicle tool kit.

Towing a vehicle with both axles on

the ground

It is important that you observe the safety

instructions when towing away your vehicle

(

Y

page 337).

The automatic transmission automatically

shifts to position P when you open the driver's

or front-passenger door or when you remove

the SmartKey from the ignition lock. In order

to ensure that the automatic transmission

stays in position N when towing the vehicle,

you must observe the following points:

X

Make sure that the vehicle is stationary and

the SmartKey in the ignition lock is in posi-

tion 0.

X

Turn the SmartKey to position 2 in the igni-

tion lock.
On vehicles with KEYLESS-GO, use the

SmartKey instead of the Start/Stop button

(

Y

page 151).

X

Depress and hold the brake pedal.

X

Shift the automatic transmission to posi-

tion N.

X

Release the brake pedal.

X

Release the parking brake.

X

Switch on the hazard warning lamps

(

Y

page 124).

X

Leave the SmartKey in position 2 in the

ignition lock.

i

When towing with the hazard warning

lamps switched on, use the combination

switch as usual to signal a change of direc-

tion. In this case, only the indicator lamps

for the direction of travel flash. After reset-

ting the combination switch, the hazard

warning lamp starts flashing again.

Towing the vehicle with the rear axle

raised

!

Vehicles with 4MATIC must not be towed

with either the front or the rear axle raised,

as doing so will damage the transmission.

!

Vehicles with automatic transmission

must not be towed with the rear axle raised.

The vehicle/trailer combination may oth-

erwise swerve or even roll over.

!

The ignition must be switched off if you

are towing the vehicle with the rear axle

raised. Intervention by ESP

®

could other-

wise damage the brake system.

Transporting the vehicle

!

You may only secure the vehicle by the

wheels, not by parts of the vehicle such as

axle or steering components. Otherwise,

the vehicle could be damaged.

The towing eye can be used to pull the vehicle

onto a trailer or transporter for transporting

purposes.

X

Turn the SmartKey to position 2 in the igni-

tion lock.

X

Shift the automatic transmission to posi-

tion N.

As soon as the vehicle has been loaded:

X

Prevent the vehicle from rolling away by

applying the parking brake.

X

Shift the automatic transmission to posi-

tion P.

Towing and tow-starting

339

Roadside

Assistance

Z