Mercedes-Benz E-Cabriolet 2015 - Manual (Page 240)

Selecting the permanent display function
You can determine whether the multifunction
display permanently shows your speed or the
outside temperature.
X Press the = or ; button on the steer-
ing wheel to select the Sett Sett menu.
X
Press the : or 9 button to select the
Inst. Cluster Inst. Cluster submenu.
X Press a to confirm.
X
Press the : or 9 button to select the
Permanent Display Permanent Display function.
You will see the selected setting Outside Outside
Temperature Temperature or Additional Speedome‐ Additional Speedome‐
ter [km/h] ter [km/h] / Additional Additional Speedometer Speedometer
[mph] [mph] .
X
Press the a button to save the setting.
i The speed is highlighted in km/h or in
mph conversely to your speedometer.
Lights
Setting the brightness of the instrument
cluster lighting and switches
The lighting in the instrument cluster, in the
displays and the controls in the vehicle inte-
rior can be adjusted with the Brightness Brightness
Display/Switches: Display/Switches: function.
X Press the = or ; button on the steer-
ing wheel to select the Sett. Sett. menu.
X
Press the : or 9 button to select the
Lights Lights submenu.
X Press a to confirm.
X
Press the : or 9 button to select the
Brightness Display/Switches: Brightness Display/Switches: func-
tion.
You will see the selected setting.
X
Press a to confirm.
X Press the : or 9 button to adjust the
brightness to any level from Level 1 Level 1 to
Level 5 Level 5 (bright).
X Press the a or % button to save the
setting.
If the light switch is set to Ã, T or
L, the brightness is dependent upon
the brightness of the ambient light.
i The light sensor in the instrument cluster
automatically controls the brightness of
the multifunction display.
In daylight, the displays in the instrument
cluster are not illuminated.
Switching the daytime running lamps on/
off
i This function is not available in Canada.
X
Press the = or ; button on the steer-
ing wheel to select the Sett. Sett. menu.
X Press the : or 9 button to select the
Lights Lights submenu.
X
Press a to confirm.
X Press : or 9 to select the Day Day
Lights Lights function.
If the Day Lights Day Lights function has been
switched on, the cone of light and the W
symbol in the multifunction display are
shown in orange.
X Press the a button to save the setting.
Further information on daytime running
lamps (
Y
page 135).
Activating/deactivating surround light-
ing and exterior lighting delayed switch-
off
X
Press the = or ; button on the steer-
ing wheel to select the Sett. Sett. menu.
X
Press the : or 9 button to select the
Lights Lights submenu.
X Press a to confirm.
X Press : or 9 to select the Sur‐ Sur‐
round Lighting round Lighting function.
If the Surround Surround Lighting Lighting function is acti-
vated, the light cone and the area around
238
Menus and submenus
On-board
computer
and
displays