Lifesmart LS-IQH-63 - Manual (Page 10)

10
OPERATING INSTRUCTIONS
1. Turn the heater on or off by turning the Mode Knob
on the control panel (C) to the 1 position.
Once the power is off, the heating elements and fan
will stop working. This is a normal function.
1
C
2. Select a heat setting by turning the Mode Knob on
the control panel (C) to the 1, 2 or fan only position.
Power for setting 1 mode is 500 W; setting 2 mode
is 1,000 W. FAN mode is an cooling function. When
FAN mode is chosen, the heater will operate at
approximately 15 W.
2
C
3. Set the thermostat by turning the thermostat control
knob clockwise or counter clockwise on the control
panel (C).
You can set the temperature on the heater anywhere
between (-) and (+) of the thermostat. Turn the
thermostat knob towards (-) or (+) to get a lower or
higher desired temperature. Once you have chosen
the desired temperature, the heater will cycle on and
off to maintain the desired room temperature. For
continuous heat, set the thermostat towards (+).
3
C
4. To set the oscillation feature ON or OFF, press the
oscillation button on the control panel (C).
4
C